New latex dry glove system complete with inner to work with the Antares Silicon System from Si tech.

Available in sizes small, medium, large, extra large and XXL large.

Our standard knife pocket measures 7 cm wide and 21 cm long and tapering down to 4 cm wide at the bottom however, we can make the pocket to any given dimensions to fit your personal knife sheaf.

The zip cargo pocket is mounted onto a plate, pocket measures 18 cm wide by 23 cm long and has a maximum depth of 9 cm, the zipper is fitted across the top and part way down the sides.

The slate pocket has Velcro across the top and down the side to allow for easy access for removing slate, this part of the pocket measures 22 cm wide by 27 cm long.

The camera pocket section has been designed to fit most cameras in their housing, measuring 15 cm wide 17 cm long and a pocket depth of 8 cm.

This pocket is sewn on to the front part of the slate pocket, there is also a slate pen holder sewn down the side of the camera pocket.

This pocket is usually made from the same material as the suit is made from.

This is a flat slate pocket with Velcro across the top and down one side to allow easy access to your slate and measures 21 cm wide by 27 cm long.

The pocket is sewn into the seams of the dry suit if ordered when dry suit is being manufactured and is usually in the same material as the suit.

The folded pocket is sewn directly onto the suit and is incorporated with the seams, this pocket measures 20 cm wide 27 cm long and as a depth opening of 7 cm at the top of the pocket.

This pocket has a Velcro flap at the top and is usually made in the same material as the suit.


Combi pockets are mounted on the side of the thigh as standard, but can be fitted to the front of the thigh if preferred.

The combi pocket system has a slate pocket mounted behind with approx 20 cm opening and retaining D-ring.

The combi pocket itself has a zip opening of approx 20 cm and a zip opening bellow system giving a depth of up to 8 cm maximum width 20 cm and maximum length 26 cm with a retaining D-ring fitted inside the pocket.

The tech pocket is mounted on a plate which is then used as a slate pocket, the slate pocket has a 21 cm opening and there is also a retaining D-ring.

The tech pocket measures 22 cm wide by 27 cm long and as a depth of 9 cm and the flap is fastened via Velcro fastening and there is a further retaining D-ring inside the pocket. This pocket is usually made in the same material as the suit.