Cordura/Polyester Front Entry
This new innovative design drysuit uses a telescopic torso with a front entry zip and a second zip cover.
Thanks to this innovative design, the adjustable dump valve can be fitted in the optimum venting position of your choice. Another feature of this design is elimination of all seams around the neck seal area, helping to increase the reliability and life of the seal.
The CP1 Pro features a Cordura fabric in the lower part of the suit for its excellent durability and strength while the polyester fabric is using the upper body for its increased flexibility and strength.
The CP1 Pro has one combination pocket fitted as standard and is available in both male and female sizes, see telescopic size chart. Alternatively you can use our custom fit service for bespoke suits.
Developed by ourselves in 1984, our seam sealing system is still the market leader today.
Firstly we use a twin-needle stitching technique followed by a primary sealing with a narrow neoprene tape, then a secondary sealing using a wider neoprene tape.
Guaranteeing many years of dry sealed seams!
These boots are specially manufactured for AZDRY and uses a latex rubber dipping process in its manufacture which leaves the boots softer and more flexible than many other boots manufactured in different ways.
Neoprene boots offer support and protection whilst remaining extremely comfortable.
Two combi pockets come as standard with this suit, these pockets are mounted on the side of the thigh as standard, but can be fitted to the front of the thigh if preferred.
The combi pocket system has a slate pocket mounted behind with approx 20 cm opening and retaining D-ring.
The combi pocket itself has a zip opening of approx 20 cm and a zip opening bellow system giving a depth of up to 8 cm maximum width 20 cm and maximum length 26 cm with a retaining D-ring fitted inside the pocket.
Sizes may vary slightly depending on size of suit
Latex seals are fitted as standard, these seals are fitted onto the suit and are taped inside and outside. Heavy duty cuff seals are used which comes in four sizes plus sizing rings for the perfect fit.
Bellowed latex neck seal is used which are taped inside and out and come in four different sizes.